Even with the most advanced tanning equipment available, a spray tan will not mask bad skin preparation or make up for errors made during application. Dry areas of the skin, poor exfoliation prior to application, and remnants of previous tans will each impact the outcome of the spray tan.
A quality spray tanning machine will allow for application of the tanning solution in a thin, uniform manner. However, achieving a smooth finish is dependent upon how you prepare prior to the session and what you do following the session.
Why Does Skin Preparation Matters?
The use of a tanning product will have a smoother application when you have prepared properly. Dead skin cells, body oils, and/or dry spots can result in the product applying unevenly.
Here are some simple steps to follow before your appointment:
- Gently exfoliate to rid the skin of dead cells.
- If you shave, do so several hours or days beforehand.
- Please do not use heavy oils & moisturisers before using.
- Your skin should be clean and totally dry.
- Focus on the elbows, knees, ankles and heels.
These areas will typically contain more product as the skin is naturally drier. Some preparation can assist in preventing dark spots and/or irregular colouring.
What Your Spray Tanning Machine Cannot Do?
Equipment used today provides some control over the application of tanning products; however, there are many issues that cannot be corrected by the use of equipment. For example, if you have some of your previous tan still present on your body when you begin applying a new layer of product, then the new layer will likely develop differently than if you had no old tan on your body.
A spray tan machine cannot compensate for poor application techniques. The person who applies the spray tan must use proper spraying motion, hold the nozzle at the correct distance from the body, and apply enough solution to each part of the body without over-applying it.
The selection of an appropriate tanning product is also very important. There are many different types of products available on the market that will be more suitable for each individual’s skin type and desired level of tanning.
Why Tan Removal Is Just as Important?
When your tan begins to fade, it’s possible that some parts of your body will lose colour much quicker than other parts. The result is that you could have patchy-looking skin in places such as around your joints and areas of your body which are washed on a regular basis.
When using a suitable tan remover with a tan remover glove, you will be able to remove any leftover tanning product. Make sure to follow the instructions for the tanning remover, and apply with light pressure instead of pressing down hard.
For better results:
- Allow enough time for the old tan to fade or become ready for removal.
- Use a suitable tan remover.
- Work gently over stubborn areas.
- Rinse well and moisturise afterwards.
Avoid aggressive exfoliation, as it can irritate your skin.
Prepare, Remove and Tan Again
A fresh spray tan begins with preparation long before the machine is turned on. Removing any remaining colour from your previous spray tan and preparing your skin will allow you to develop an even foundation for the next spray tan.
When using either a salon service or a home spray tan machine, make sure to properly prepare your skin before applying the product and then properly care for your skin after. Have a tan-removing glove ready for your next application. Allow your skin to heal from previous applications prior to applying again.
Having the right tools is important, however, taking care of your skin before and after using those tools will provide a softer, more natural-looking appearance.
















